2024 CASE CX80C For Sale in (2024)

Photos(1)

Compare

Crawler Excavators

Call for price

Crawler Supply Co.

Contact:Daniel Cloy

Phone:(225) 306-7027

Baton Rouge, Louisiana 70805

(225) 306-7027

Get Shipping Quotes Opens in a new tab

Apply for Financing Opens in a new tab

General

Description

CASE CX80C − MIDI EXCAVATORThe CASE CX80C mid-sized excavator brings the power and performance of a full-sized excavator in a smaller package for improved jobsite accessibility and efficiency. The Tier 4 engine uses CEGR technology to maximize fuel efficiency in a simple yet powerful system. The CX80C offers 9% more hydraulic power than previous models for greater digging power.CASE MIDI EXCAVATORSCASE C Series midi excavators deliver powerful excavating, lifting and craning capabilities — all in a footprint that is easy to transport and provides greater access on tight jobsites. Simple groundline serviceability, a "no DPF, no regeneration, no fluids" emissions solution, a large and spacious cab, simple controls and excellent visibility all allow for easy owning and operating. Choose between a conventional or minimum-swing-radius design, rubber or steel tracks, and other boom, hydraulics and performance considerations to add an extremely versatile excavator to your fleet — whether working between buildings, on the side of the road or around other utilities.FEATURESPRODUCTIVITYFrom demolishing or repairing streets to creating retaining walls for landscape projects, the CX80C mid-sized excavator has the power and torque to complete even your toughest jobs. A wider dozer blade design optimizes excavator stabilization and forces dense earth to roll easier. Due to its conventional tail design, the CX80C extends out noticeably less than full-sized conventional excavators.FUEL EFFICIENCYIncreased fuel efficiency, power and performance are achieved with the first-in-class Tier 4 engine and CEGR technology which combine to meet current environmental standards.COMFORT AND VISIBILITYStay up-to-date with crucial information regarding your machine performance and diagnostics with a 7 inch full color monitor. The cab features 16% more glass for greater visibility. The CX80C provides the best in operator comfort with more leg room, ergonomic control positions and an automatic climate control system.SERVICEABILITYMaintenance is made easy with repositioned access points and engine components. Cleaning in dustier environments is simple with swing out coolers and a sliding radiator cleaning net.STANDARD EQUIPMENTENGINE•Isuzu four-cylinder turbo-charged diesel•Tier 4 Final Certified•Electronic fuel injection•Neutral safety start•Auto-engine warm up•Glow-plug pre-heat•One-touch idle•Dual-stage fuel filtration•Dual element air filter•Remote oil filter•Green plug oil drain•500-hour engine oil change interval•24-volt system•Color LCD monitor•Auto idle shutdown systemHYDRAULICS•ISO pattern controls•5,000 hour hydraulic oil change interval•1,000 hour hydraulic filter change interval•Mechanical disc brakes•Three (3) work mode settingsUPPER STRUCTURE•Right and left side mirrors•Viscous mounted cab – fluid•Common key vandal locks•Upper mounted work light – 70 watt•Cab mounted work light - 70 watt•Swivel guard belly panOPERATOR ENVIRONMENT•FOPS Level 1 cab top guard•Pressurized cab•One-touch lock front window•AC/heat/defrost w/ auto climate control•6 watt interior dome light•Mechanical-suspension cloth seat•Adjustable armrests•Low-effort joystick controls•Controls pre-wired for auxiliary•Blade control lever•AM/FM radio w/ antenna and 2 speakers•Anti-theft start code system•Rubber floor mat•12-volt electric socket•24-volt cigarette lighter•External rear view mirrors•Windshield wiper/washer•Cup holder•Storage compartments•Travel alarm w/ cancel switch•One key start and lock-up•Built-in full-color LCD monitor•Safety glass for all windows•Polycarbonate roof hatchATTACHMENTS•Boom•Arm – 5 ft 7 in (1.69 m)•Boom mounted work light – 70 watt•Attachment cushion valveUNDERCARRIAGE•1 ft 6 in (0.45 m) steel shoes, triple semi-grouser•Full overlap turntable bearing tub•Front track chain guides•Hydraulic track adjustment•X-pattern carbodyOPTIONAL EQUIPMENTAUXILIARY HYDRAULICS•Single acting•Double acting•Proportional controlsATTACHMENTS•Arm – 7 ft 2 in (2.19 m)•Coupler/Case multi-pin grabber•Heavy-duty bucketUNDERCARRIAGE•23.6 in (600 mm) steel shoes, triple semi-grouser*•1 ft 6 in (450 mm) rubber pads bolted to standard rail•1 ft 6 in (450 mm) full rubber tracks•*Note: blade will not fully cover 23.6” shoeOPERATOR ENVIRONMENT•Control pattern selector•FOPS cab top guard – Level 2•Front grill guard – 2 x 2 screen mesh•Front rock guard: Vertical bars – fixed/one piece/OPG 2•Rear cameraSimilar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

Engine

Model

Isuzu AP-4LE2X

Emissions Certification

Tier 4 Final

Fuel

Requires ultra low-sulfur fuel B5 biodiesel tolerant

Type

Water-cooled, 4-cycle, high pressure common rail system. Turbo-charged w/ air cooled intercooler, DOC system

Cylinders

4-cylinder in-line

Displacement

133 in³ (2.2 L)

Bore/Stroke

3.35 x 3.78 in (86 x 96 mm)

Fuel Injection

Direct injection – electronic

Fuel Filter

Replaceable, full flow spin-on cartridge

Air Filter

Dry type element w/ warning restriction indicator

Oil Filter

Replaceable, full flow spin-on cartridge

Engine Gradeability

Side-to-side 35° | Fore and aft 35°

Net Horsepower

SAE J1349 @ 2000 RPM: 53.6 hp (40 kW)

Net Max. Torque

SAE J1349 @ 1800 RPM: 142 lb·ft (193 N·m)

Cooling Operating Range

109.4° to -13° F (43° to -25° C)

Oil

Requires low-ash oil CJ-4

Drivetrain

Travel Control

Dual stage relief/counter balance design

Brakes

Mechanical disc

Service brakes

SAHR disc – each motor

Electrical

Voltage

24 Volts

Alternator

50 amp

Batteries

2 x 12 Volt

Battery reserve capacity

64 Ah/ 5 hour

Work Lights

24 Volt | 1 boom 70 watt | 1 upper 70 watt | 1 house 55 watt

Operator Environment

Air conditioner output

13,490 BTU/hr

Heater output

12,900 BTU/hr

Sound level inside cab – ISO6395

73.0 dBA

Attachment

Boom

11 ft 6 in (3 500 mm)

Arm

Standard 5 ft 7 in (1 690 mm)

Bucket Digging Force

12,800 lbf (56.9 kN)

Operating Weight

Standard

18,900 lb (8 590 kg)

w/ shoes

1 ft 6 in (450 mm)

w/ boom

11 ft 6 in (3 500 mm)

w/ arm

5 ft 7 in (1 690 mm)

w/ bucket

463 lb (210 kg)

w/ dozer blade

7 ft 7 in (2 320 mm)

w/ counterweight

2,430 lb (1 100 kg)

Dozer Blade

Blade Width

91.3 in (2 320 mm)

Blade Height

17.7 in (450 mm)

Max lift above ground

17.3 in (440 mm)

Max drop below ground

11.0 in (280 mm)

Ground Pressure

At Standard Operating Weight

5.5 psi (0.38 bar) w/ 17.7 in (450 mm) triple semi-grouser shoes

Hydraulics

System design

Open center

Main Pumps

Two variable displacement/axial piston

Max. Rated Flow

2 x 19.5 gpm (74 L/min) per pump | 39.1 gpm (148 L/min) total

System Pressures

Boom, arm and bucket 4,260 psi (294 bar) | Boom swing circuit 4,260 psi (294 bar) | Travel circuits 4,260 psi (294 bar) | Swing circuit 3,280 psi (226 bar)

Pilot Pump

1 x gear design

Pilot Pump Max. Capacity

4.8 gpm (18 L/min)

Blade Pump

1 x gear design

Blade Pump Max. Capacity

9.4 gpm (35.4 L/min)

Hydraulic Cylinders

Boom Cylinders

One (1)

Boom Cylinders - Cylinder bore

4.5 in (115 mm)

Boom Cylinders - Cylinder rod diameter

3.0 in (75 mm)

Boom Cylinders - Cylinder stroke

33.5 in (850 mm)

Arm Cylinder

One (1)

Arm Cylinder - Cylinder bore

3.9 in (100 mm)

Arm Cylinder - Cylinder rod diameter

2.6 in (65 mm)

Arm Cylinder - Cylinder stroke

29.7 in (755 mm)

Bucket Cylinder

One (1)

Bucket Cylinder - Cylinder bore

3.3 in (85 mm)

Bucket Cylinder - Cylinder rod diameter

2.2 in (55 mm)

Bucket Cylinder - Cylinder stroke

26.2 in (665 mm)

Boom Swing

One (1)

Boom Swing - Cylinder bore

3.7 in (95 mm)

Boom Swing - Cylinder rod diameter

2.2 in (55 mm)

Boom Swing - Cylinder stroke

26.6 in (675 mm)

Service Capacities

Fuel Tank

31.7 gal (120 L)

Hydraulic System

25.4 gal (96.3 L)

Hydraulic Tank

13.5 gal (51 L)

Engine Oil w/ Filter

3 gal (11.5 L)

Final Drive

0.3 gal (1.1L)

Cooling System

3.2 gal (12.2 L)

Other Specifications

Swing Speed

0 – 10.4 RPM

Swing Torque

12,500 lb·ft (17 000 N·m)

Swing Brake

Mechanical disc

Undercarriage Length

9 ft 4 in (2 845 mm)

Undercarriage Track Gauge

6 ft 2 in (1 870 mm)

Undercarriage Carrier Rollers - each side

Undercarriage Track Rollers - each side

Shoes - Triple Grouser - each side

Shoe width – std.

1 ft 6 in (450 mm)

Link pitch

6.1 in (154 mm)

Track Chain

Grease lubricated/strutted

Track Guides

Single

Track Adjustment

Hydraulic

Dimensions

Arm length

5 ft 7 in (1.69 m) Arm | 7 ft 2 in (2.19 m) Arm

Overall height with attachment

9 ft 1 in (2 760 mm) | 9 ft 1 in (2 760 mm)

Cab height

9 ft 1 in (2 760 mm) | 9 ft 1 in (2 760 mm)

Overall length with attachment

21 ft 11 in (6 680 mm) | 22 ft 1 in (6 730 mm)

Overall length without attachment

11 ft 2 in (3 410 mm) | 11 ft 2 in (3 410 mm)

Width of upper structure

7 ft 5 in (2 270 mm) | 7 ft 5 in (2 270 mm)

Track overall length

9 ft 4 in (2 845 mm) | 9 ft 4 in (2 845 mm)

Track overall width

w/ 17.55 in (450 mm) shoes 7 ft 7 in (2 320 mm) | 7 ft 7 in (2 320 mm)

Track shoe width

1 ft 6 in (450 mm) | 1 ft 6 in (450 mm)

Track gauge

6 ft 2 in (1 870 mm) | 6 ft 2 in (1 870 mm)

Center to center – idler to sprocket

7 ft 3 in (2 210 mm) | 7 ft 3 in (2 210 mm)

Upper structure ground clearance

2 ft 6 in (750 mm) | 2 ft 6 in (750 mm)

Minimum ground clearance

1 ft 2 in (360 mm) | 1 ft 2 in (360 mm)

Rear tail swing radius

5 ft 6 in (1 680 mm) | 5 ft 6 in (1 680 mm)

Dozer blade width

7 ft 7 in (2 320 mm) | 7 ft 7 in (2 320 mm)

Dozer blade height

1 ft 6 in (450 mm) | 1 ft 6 in (450 mm)

Performance Specs

Arm

5 ft 7 in (1.69 m) Arm | 7 ft 2 in (2.19 m) Arm

Maximum dig radius

23 ft 3 in (7 090 mm) | 24 ft 10 in (7 560 mm)

Dig radius at groundline

22 ft 9 in (6 940 mm) | 24 ft 4 in (7 420 mm)

Maximum dig depth

13 ft 9 in (4 180 mm) | 15 ft 4 in (4 670 mm)

Dig depth - 8 ft 0 (2.44 m) level bottom

12 ft 6 in (3 810 mm) | 14 ft 4 in (4 360 mm)

Dump height

14 ft 10 in (4 530 mm) | 15 ft 11 in (4 850 mm)

Maximum reach height – maximum dig height

21 ft 7 in (6 570 mm) | 22 ft 7 in (6 890 mm)

Bucket rotation

177° │ 177°

Maximum vertical wall dig depth

11 ft 0 in (3 350 mm) | 12 ft 10 in (3 920 mm)

Minimum swing radius

9 ft 2 in (2 790 mm) | 9 ft 11 in (3 030 mm)

Arm digging force

8,880 lb (39.5 kN) | 7,600 lb (33.8 kN)

Bucket digging force*

12,800 lb (56.9 kN) | 12,800 lb (56.9 kN)

Dozer blade cutting edge Maximum height

1 ft 5 in (440 mm) | 1 ft 5 in (440 mm)

Dozer blade cutting edge Maximum depth

11 in (280 mm) | 11 in (280 mm)

Note

*Digging force ratings based on ISO6015.